How to Choose the Best Car Cleaning Cloth, Sponge or Mit

The Essential Characteristics of a Car Cleaning Mit, Sponge or Cloth

The best car washing products are those that clean the vehicle quickly and thoroughly, but also protect the paint by pulling dirt and grit away from the surface during the wash process. The best car wash materials are also those that then release the dirt and grit into the rinse water so that they do not themselves become abrasive during the wash. With a quality product, rinsing often will help protect the clear coat during both the wash and car drying process. Any car washing product that comes into contact with a vehicles’ paint (or clear coat) then should have the following characteristics:

  • Soft or Non-abrasive
  • Nap (deep pile)
  • Holds Lots of Soapy Water
  • Release dirt and grit when rinsed

Very Soft or Non-abrasive Material

Any product that comes into contact with a vehicle’s paint should obviously be as soft as possible. Many types of disposable towels, such as paper towels, are made from wood pulp and the fibers are much more rigid and can easily scratch and leave swirl marks in the paint finish. Only materials with pliant fibers and lots of nap should be used for car washing.

Have Plenty of Nap (deep pile) Bilvask kĂžbenhavn

Nap is the product of many fibers that stick out, or are unwoven, from the material. Nap is what gives a material the characteristic of “softness”. Materials with more nap have the ability to pull dirt and grit up into the material and trap it away from the surface that is in contact with the paint. The more nap a product has the softer it feels and the more effective it will be at removing dirt and grit from the surface and protecting the finish.

Holds Lots of Soapy Water

The amount of soapy water the material holds is also an important factor in choosing a car washing product. Soapy water provides an additional buffer between the sponge, mit or cloth and the car’s finish. The soapy water will also help breakdown and loosen dirt and grit from the surface and make it easier for the product to then remove it and pull it into the fibers.

Release Dirt and Grit when Rinsed

The best car was products are also those that release any trapped dirt and grit trapped in the fibers into the rinse water so that they themselves do not become saturated. The ability of a material to release dirt into the rinse water will prevent it from becoming abrasive over the course of the wash process. The greater the ability of the material to release dirt and grit into the rinse water, the cleaner the product will be when it is reapplied to the vehicle’s finish, and the less chance there will be to damage the paint

Leave a Reply

Your email address will not be published.